Project: Ghostrideranime.hfp
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 114.29x200mm in size
You may print at higher layer heights below the Min Depth of 0.32mm
The Max Depth is 2.2mm and the Actual Depth is 1.8mm

Filaments Used:
    PLA+ eSun White Transmission Distance: 6.5
    PLA PolyTerra Savannah Yellow Transmission Distance: 3.5
    PLA+ Esun Orange Transmission Distance: 5
    PLA+ eSun Fire Engine Red Transmission Distance: 5.5
    PLA PolyLite Black Transmission Distance: 0.3
This print uses 5 unique filaments

Swap Instructions:
    Start with White
    At layer #7 (0.64mm) swap to Savannah Yellow
    At layer #9 (0.8mm) swap to Orange
    At layer #12 (1.04mm) swap to Fire Engine Red
    At layer #17 (1.44mm) swap to Black for the rest.