Updated PLA Version available (V6):
[https://makerworld.com/en/models/1416545-slim-wallet-v6-print-in-place#profileId-1471135](https://makerworld.com/en/models/1416545-slim-wallet-v6-print-in-place#profileId-1471135) 

-----------------

A print-in-place slim wallet that offers space for 3 cards and cash.
 

This is the Version of Slim Wallet (V6) - TPU with only 3 cards!

Original version: [https://makerworld.com/en/models/928636#profileId-892240](https://makerworld.com/en/models/928636#profileId-892240)

This is the TPU Version of Slim Wallet - Thin Version (3 cards)!

Original version: [https://makerworld.com/en/models/853423#profileId-802049](https://makerworld.com/en/models/853423#profileId-802049)

• new Version uses TPU for AMS from BambuLab (or similar TPU with a hardness of 68D)
• now the springs are more smooth but also don´t break as before
• cards now don´t fall out even with more force due to adjusted diameters for TPU
• overall adjusted parameters
• also solves the problem of coins clattering in the cash drawer by using TPU
• releasing the lever requires more force than with PLA!

-------------------------------------------

For everyone asking why I didn't just use TPU for the springs and made the rest out of PLA:

• The filament changes of the AMS cause that you need more filament than printing the model completely from TPU
• also it feels pretty good thanks to the TPU

-------------------------------------------

• cards snap in and they don´t fall out
• I rounded the corners a bit to make it feel better
• it´s only 11 mm thick (original version: 17mm)
• It´s print in place
• has place for up to 3 cards
• has a cash drawer with enough room
• The drawer snaps in and holds its position

-------------------------------------------

V6 (for TPU for AMS): [https://makerworld.com/en/models/928636#profileId-892240](https://makerworld.com/en/models/928636#profileId-892240) 

Version without the Cash Drawer (for TPU for AMS): [https://makerworld.com/en/models/940285#profileId-905884](https://makerworld.com/en/models/940285#profileId-905884) 

V5 (for PLA): [https://makerworld.com/en/models/697590#profileId-626646](https://makerworld.com/en/models/697590#profileId-626646) 

Version without the cash drawer (for PLA): [https://makerworld.com/en/models/719764#profileId-650613](https://makerworld.com/en/models/719764#profileId-650613) 

Thinner Version for 3 cards and cash (for PLA): [https://makerworld.com/en/models/853423#profileId-802049](https://makerworld.com/en/models/853423#profileId-802049) 

-------------

If you want to sell printed parts from my designs or want to get the .step files of my models you can become a member of my Patreon: [https://www.patreon.com/c/makerversedesigns](https://www.patreon.com/c/makerversedesigns)

You like my free 3D models? I also create custom 3D designs for 3D printing: [https://www.fiverr.com/s/yvRqgr6](https://www.fiverr.com/s/yvRqgr6) 

-------------

Have fun with it and leave a like or subscribe if you like it!

If there are any suggestions for improvement, feel free to write a comment.