Just added:

• A print profile of the handles with a looser fit that slide easier into the model. You could add a drop of glue if they are too loose.

   

• A print profile with stronger connectors (RECOMMENDED).

  These connectors are rotated 90° from the original design, so the layer lines align with the tabs, making them stronger.

  The connectors need supports this way, but they are easy to remove.

This compact, 3D printable mini toolbox features a clever cantilever design for easy access to your tools or small items.

It is easy to assemble, but you can download the assembly guide, if needed.

There is a large version (3-layer) and a small version (2-layer). The small version consists of mostly the same parts, except for a smaller handle and the middle compartments are not included. Also, you need 4 connectors instead of 8.

Dimensions:

Large version: ±210x150x154mm (WxDxH) - handle not included 

Small version: ±210x150x116mm (WxDxH) - handle not included 

Filaments used:
Bambu PLA Basic Black (10101)

Bambu PLA Metal Oxide Green Metallic (13500)

Bambu PLA Metal Cobalt Blue Metallic (13600)

Tips:

- If you have problems with warping, use an adhesive spray or add a brim to the models.

- Use ‘PLA Basic’ or ‘PetG’ (or stronger) for the connectors.

- Don't use ‘PLA Silk’ or ‘PLA Matte’ for the connectors, as they break and wear out too easily.

- Add 2 strokes of ‘Adhesive Foam Sponge Strip Roll’ (NC005) to the bottom compartments for more stability/less sliding (not necessary for functionality)

Also check out my other model:

Jewellery / tool box