Picture Credit: [https://www.deviantart.com/wolfspirit9992/art/Darwin-Portrait-907945781](https://www.deviantart.com/wolfspirit9992/art/Darwin-Portrait-907945781)

Creator: Wolfspirit9992

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 70.1x89.75mm in size
You may print at higher layer heights below the Min Depth of 0.24mm
The Max Depth is 2mm and the Actual Depth is 2mm

• Print Uses 3 Unique Filaments:
  • PLA BambuLab Basic Black Transmission Distance: 0.6
  • PLA BambuLab Basic Gray Transmission Distance: 2
  • PLA BambuLab Basic Jade White Transmission Distance: 5

Swap Instructions:

• Start with Black
• At layer #7 (0.64mm) swap to Gray
• At layer #12 (1.04mm) swap to Jade White for the rest.