Make yourself or someone else a trophy!

This is a fully 3D printable trophy with customizable name plate and no need to use an AMS. It also doesn't need any support and can be put together without glue (maybe some glue will help if the friction is not enough and can vary with the used filament).

The trophy has a height of 100 mm but can be scaled up if you need a bigger one.

The parts are separated into 3 plates to make it printable without an AMS.

I added a color change at layer height for the name plate, but if you don't want it you can remove the painting of course.

Custom Name:

The name can be customized within Bambu Studio as shown in the images below.

First click on the text shape symbol on plate 3

Then just click on the text symbol at the upper menu bar

Now you can edit the text, font , height etc.

Assembly:

After the print you can put the parts together as shown here

If the connectors for the name plate are to tight or loose, you can leave them out and just glue the name plate to the base.

If you like this design and printed it, I would love to see some results. :)