HUEFORGE GMC

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.2mm

Filaments Used:

PETG JAYO Black Transmission Distance: 0.3
PLA BambuLab Basic Jade White Transmission Distance: 4

PLA Protopasta Out of Darts Orange Transmission Distance: 11

!!!! It appears you have mixed filament types. Be certain this is what you want. !!!!!

Swap Instructions: Start with Black

At layer #4 (0.44mm) swap to Jade White
At layer #10 (0.92mm) swap to Out of Darts Orange for the rest.

ADVISE:

If you want to change the color of the car, instead of orange, use the one you like best.