This moonphase clock measures over 20 inches tall and wide, with a rotating, functioning moon-phase day/night feature hidden under the clock face. The complication can be used for any 24 hour feature as it is geared to rotate 1/24 per hour. the case of the clock will require 1kg of filament, and the top can be done in less than 1kg if you prefer not to use coloration. Parts can be deleted as necessary, so feel free to make any modifications. 

*If resizing the clockface, please be sure to leave the negative parts the same size as they are important to the gear ratios and placement working. 

Some glue may be necessary to connect the face and case pieces, as it is important that the gear be held in place snugly.

You will need to locate or buy this kit off Amazon: 

[https://www.amazon.com/Mudder-Shaft-Quartz-Movement-Repair/dp/B073XGSTH9/ref=asc_df_B073XGSTH9?mcid=1e959439fe1439929ee02c430b995898&tag=hyprod-20&linkCode=df0&hvadid=693602988389&hvpos=&hvnetw=g&hvrand=10373563852612716164&hvpone=&hvptwo=&hvqmt=&hvdev=c&hvdvcmdl=&hvlocint=&hvlocphy=9031212&hvtargid=pla-351170009988&psc=1](https://www.amazon.com/Mudder-Shaft-Quartz-Movement-Repair/dp/B073XGSTH9/ref=asc_df_B073XGSTH9?mcid=1e959439fe1439929ee02c430b995898&tag=hyprod-20&linkCode=df0&hvadid=693602988389&hvpos=&hvnetw=g&hvrand=10373563852612716164&hvpone=&hvptwo=&hvqmt=&hvdev=c&hvdvcmdl=&hvlocint=&hvlocphy=9031212&hvtargid=pla-351170009988&psc=1)

The whole project is made on a X1C and takes just under 5 days.