Você está no 3DFinder
Buscamos em Thingiverse, MakerWorld e Printables ao mesmo tempo para te dar o melhor de cada uma.
Descrição
An inspirational design re-engineered for 3D Printing.
Its designed to be used with 10mm balls/Marbles.
It is very addictive to watch. The design allows for use of up to 4 marbles with ease.
You will find the build instructions here:
[https://www.youtube.com/watch?v=jIGBb8CHVqw](https://www.youtube.com/watch?v=jIGBb8CHVqw)
To complete this project, you will need the following
5 MR105 Bearings (If your print is loose or bearings unable to sit square, You may want to double up and put 2 bearings back to back in all the places.)
3 M5 x 20mm Screws
1 M5 x 15mm Screw
1 M5 x 10mm Screw
2 M3 x 20mm Screws
4 M3 x 10mm Screws
1 M3 x 20mm Screw
8 M3 Nuts
1 KCD-101 Switch
1 9V Battery Connector
1 12V Geared Motor (30 rpm)
A small length of DC Wire
Your Favourite Bonding Agent.
And some 10mm Steel Balls
You will also require the following tools:
Appropriate screwdriver (Powered Recommended)
Clamp
A pair of pliers.
Gostou deste modelo? Crie uma conta grátis para salvar seus favoritos e voltar a eles depois.
Criar conta