Steampunk Time Teller

Steampunk Clock with Motor moving gears and a slot for real clock machine.

Assembly Guide is included

Kindly make sure your machine is calibrated and flow rate for each filament is properly calibrated.

this will be running on:
9 - 12 volt power brick for the gears.
and AA battery for the clock machine.

the design might need to glue some parts and sanding/filing/deburring depends on your machine tolerances, but overall i tried my best to make big tolerances as possible.

below i will mention tools needed and parts to make this design functional.

Parts needed with AliExpress links incase you want to take parts specifications: (NON of links are sponsored NOR affiliation)

1 x Duel Shaft 12v Mini motor 27 rpm:
[https://www.aliexpress.com/item/1005004251974863.html](https://www.aliexpress.com/item/1005004251974863.html)

1 x clock machine 22mm shaft:
[https://www.aliexpress.com/item/1005002837497716.html](https://www.aliexpress.com/item/1005002837497716.html)

1 x clock hands set:
[https://www.aliexpress.com/item/1005005605157029.html](https://www.aliexpress.com/item/1005005605157029.html)

1 x momentary switch self locking 12mm diameter:
[https://www.aliexpress.com/item/1005007077811575.html](https://www.aliexpress.com/item/1005007077811575.html)

1 x 12 volt power adaptor 1.0 amps:
[https://www.aliexpress.com/item/1005005884209921.html](https://www.aliexpress.com/item/1005005884209921.html)

1 x square DC 5.5x2.5mm female socket:
[https://www.aliexpress.com/item/1005007647319964.html](https://www.aliexpress.com/item/1005007647319964.html)

1 x Wire red and black 22 or 24 AWG:
[https://www.aliexpress.com/item/1005007356973020.html](https://www.aliexpress.com/item/1005007356973020.html)

2 x 608zz Bearings:
[https://www.aliexpress.com/item/1005005940076601.html](https://www.aliexpress.com/item/1005005940076601.html)

4 x M3 x 30mm to secure the front and back plate:
[https://www.aliexpress.com/item/1005002393493838.html](https://www.aliexpress.com/item/1005002393493838.html)

2 x M3 x 8mm to secure the motor mount:
[https://www.aliexpress.com/item/1005002393493838.html](https://www.aliexpress.com/item/1005002393493838.html)

Tools that can be used: (you can use tool as per you reference).
- wire cutter
- wire stripper
- soldering iron
- hot glue to secure the wires to the frame (so it does not get caught in the gears.
- quick glue to glue the face parts and numbers. (Use 1 to 3 little drops - applying too much glue will overflow)
- sanding paper or file bar or deburring tool might be needed.

Filament used:
- Gold Silk PLA.

- Copper Silk PLA.

- Brown Silk PLA.

the assembly is pretty straight forward, every part will fit in its place, but if you have any inquiry you can message me and i will be glad to help.

i hope you like this design, i spent a long time designing it and prototyping with trial and error, i would appreciate the support.

Descrição