• 模型介绍（Model Introduction）：

时钟（Clock）是通过显示太阳和月亮相对地平线的位置来显示当前的游戏时间的物品。

A clock is an item that displays the current game time by showing the position of the sun and moon relative to the horizon.

• 游戏中用途（Usage in the game）：

时钟由表示“白天”和“黑夜”的两部分组成。随着时间的流动，时钟会缓慢地旋转以符合太阳和月亮在空中的位置，显示当前的游戏内时间。在时钟显示黄昏的几秒后，玩家能睡觉。

时钟以任何方式观看时都会显示正确的时间，包括掉落的物品、在玩家手上、在箱子中、在物品展示框中。

时钟在下界和末地中不能正常运作，时钟盘会快速地随机旋转，无法正常显示时间。

The clock consists of two parts representing "day" and "night". As time flows, the clock slowly rotates to match the position of the sun and moon in the sky, displaying the current in-game time. After the clock shows dusk for a few seconds, players can go to sleep.

The clock will display the correct time when viewed in any way, including dropped items, items in the player's hands, boxes, and item display boxes.

The clock cannot function properly in the lower bound and the terminal ground, and the clock disk will quickly rotate randomly, unable to display the time properly.

• 配件列表（Accessories List）：

• 安装步骤：

1. 打印完成后的所有物品如下 All items after printing are as follows：

2. 将钟表的机芯放入后面的背槽内并按压到底，直至另一头突出 Place the movement of the clock into the back slot and press it all the way down until the other end protrudes：

3. 可以再最宽的圆柱外侧涂抹少许胶水，然后将齿轮固定在圆柱外侧 You can apply a small amount of glue to the widest outer side of the cylinder, and then fix the gear on the outer side of the cylinder：

4. 将增高层固定在底座上，并塞入八个圆柱体插销固定 Fix the rising layer on the base and insert eight cylindrical pins to fix it：

5. 将表盘固定销插入表盘中央并将插销插入前面板的凹槽内 Insert the dial fixing pin into the center of the dial and insert the latch into the groove on the front panel：

6. 将前盖固定在增高层上，最好使用胶水加固 Fix the front cover to the increased layer, preferably with glue for reinforcement：

7. 装入一节五号电池，调整时间，大功告成！ Insert an AA battery, adjust the time, and you're done!

8. 如需放置在平面可以将支架插入后方 If you need to place it on a flat surface, you can insert the bracket into the rear：

提示（tips）:

• 底座、增高架和表盘需区分方向。
• 建议使用胶水加固。
• 有任何意见和建议请留言~
• The base, elevated stand and dial need to be oriented differently.
• It is recommended to use glue for reinforcement.
• If you have any comments or suggestions, please leave a message~