This model is designed to fit the Wisecoco 7-inch Touchscreen Monitor. The display arm lengths are parameterized allowing you to customize the lengths of the arms as needed. Note that there is an absolute minimum for the arm lengths to maintain functionality. The female arm has a minimum length of 16.5mm and the male arm has a minimum length of 30mm. I modeled the arm mounts 1:1 to a GoPro mount so if needed you could attach a 360 GoPro adapter. I'm also using 90 Degree Adapters for the HDMI and Micro USB
 

Assembly Hardware

• 14 (min. 8) M3*5 threaded inserts (install the inserts as perpendicular to the surface as possible so the holes align perfectly)
  
• 4 M3 washers (before attaching the arms to the case add one washer to each screw)

• 8 M3 x 8mm screws (4 for assembling the display housing and 4 for attaching the arms to the case)
   

  

• 1 M5 Nut (for attaching the arms together)
   

  

• 1 M5x20mm screw (for attaching the arms together)