Screen/Corner Clock (Without AMS)

Description

Hexagon screen/corner clock. Designed for the corner of a monitor/television screen.

Corners of (floating)shelves, mirrors or cabinets are an option too.

Let your imagination do it's thing!

Just BE AWARE! The hour and minute hand need room to turn around.

Designed for the A1, but with A1 mini owners in mind.

This clock is 180cm in diameter.

No AMS is needed. The numbers press fit into place.

Almost any (cheap) 55mm*55mm clock mechanism will fit.

Just keep in mind that the face plate is 4mm.

Can easily be found online at the well known cheap stuff websites/apps.

Or be like me and give an old clock a second life ;)

Hour and minute hands are provided with 2 different hole diameters.

Measure your clock mechanism to be sure which ones to print.

Or just print both and see which ones fit.

Everything should fit very snug without any post processing.
The numbers need some force to press into place.

Pay attention to keep the chamfered edges on the numbers facing up.

The face plate does need supports!

Type: normal(auto), style: default.

Very easy to remove (if printed in PLA).

Stick a screwdriver (or something alike) halfway into the hole at the bottom,

wiggle wiggle,

and the whole support should come out as one piece.

If you're worried that the clock will fall off the corner,

a piece of double sided tape might give you some better sleep ;)

Any suggestions and/or critique is well appreciated!