This original Nintendo Game Boy deck box is sized for a single sleeved 100 card commander deck with room for tokens as well as some dice in the second compartment. I like to store the cards turned sideways, but the cards will also fit horizontally. So, if you want to store double sleeved cards, you can manipulate the bottom of the box and scale it without too much effort. There are two versions of the screen, a Super Mario Land version as well as a blank screen. I obviously printed mine with the Super Mario Land screen and it literally looks like the screen is on. I am super proud of this thing! This can be printed with or without an AMS. The Super Mario Land screen is a separate .3mf file because it needs to be printed with a .2mm nozzle. You can try it with a .4mm nozzle, but I didn't and don't garuntee it will look good. I included the list of filaments I used in the bill of materials below. Hit me up with questions or suggestions for improvement. Always open to criticism. I opened 3D modeleing software for the first time about 1 month ago, so I'm sure there are many ways to improve. The magnets for this are 8mmx2mm but I measured specifically for the magnets I had on hand which were these: [https://www.amazon.com/dp/B08C4SQSM3?ref=ppx_yo2ov_dt_b_fed_asin_title](https://www.amazon.com/dp/B08C4SQSM3?ref=ppx_yo2ov_dt_b_fed_asin_title). I made this box because there used to be something similar on this site for free, but now it is gone. I ordered up a bunch of colors specifically to print it too! I really hope you enjoy this box, and certainly feel free to do whatever you want with this model. I have uploaded the .STEP files to make it even easier to steal and improve. Please just give me credit for my work and maybe a boost if you like what I've done!