I designed this charging station using this charging bloc : [https://www.amazon.ca/dp/B0CGC76Y6Y?ref=ppx_yo2ov_dt_b_fed_asin_title&th=1.](https://www.amazon.ca/dp/B0CGC76Y6Y?ref=ppx_yo2ov_dt_b_fed_asin_title&th=1.)  Print the base and the cover and as many vertical separators as you need.  The separators keep the base and the cover together.  Printing is easy, no support required.  I used PLA printed at .20 mm and it turned out very well.  Update 2024/12/27 : Following a comment from Guserton, I have included a “Base Flat” STL.  This will allow dimensionally different chargers to fit inside the base as long as they are not too thick.