Compact and Functional Pasta Drying Rack for Homemade Pasta Lovers!

Tired of improvising when drying your homemade pasta? This practical and stylish pasta drying rack is the perfect solution!

Key Features

• Uses 15 IKEA TREBENT Bamboo Chopsticks: These are affordable, foodsafe, and easy to find. 12 chopsticks are used for hanging the pasta, and 3 are used as legs for stability. You’ll need two packs, as they come in sets of 8.
• Smart Storage: Store all the chopsticks inside the container when not in use – no more clutter!
• Easy to Use:
  1. Remove the lid by unscrewing it and take out the chopsticks.
  2. Replace the lid to secure the structure.
  3. Insert three chopsticks into the bottom of the container at about a 10° angle (to stabilize the rack).
  4. Insert the remaining 12 chopsticks into the top at about a 5° angle – this is where the magic happens! Hang your fresh pasta to dry evenly.

Pro Tips

• Insert the square end of the chopsticks into the rack. The first few times, you’ll need to use some force to make sure they stay in place. After a few uses, they will develop slight grooves, making insertion easier. If they become too loose, simply replace them.
• The chopsticks go in about 20 mm (0.8 inches).
• The base and legs are slightly flexible but sturdy – they won’t break even if you press down on the top of the container.

Stylish and Customizable Design

• The model is designed for dual-color printing, allowing you to easily customize the look. It’s split into two parts so you can print the top and bottom in different colors.
• Default colors are two shades of blue, but feel free to make it your own!
• Easy Print: No supports needed. Just remember to use a clean build plate for good bed adhesion.

Compact and Space-Saving

• In use: The rack requires approximately 50 x 50 cm (20 x 20 inches) of table space, with a height of about 35 cm (14 inches).
• For storage: The container is about 295 mm (11.6 inches) long and 60 mm (2.4 inches) in diameter, capable of storing up to 32 chopsticks.
• The chopsticks are approximately 240 mm (9.4 inches) long and about 7 mm (0.28 inches) thick at the base.

Important Note

• This model is best printed in PLA or PETG, but remember that low-glass-temperature plastics are not dishwasher safe. If the container gets dirty, simply rinse it by hand. Typically, only the chopsticks need cleaning.
• For the best experience, consider oiling the chopsticks with food-safe bamboo oil before first use. They should also be hand-washed.