The Model is 131.6x200mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.3mm and the Actual Depth is 2mm

Filaments Used:
PLA BambuLab Basic Black Transmission Distance: 0.6
PLA BambuLab Basic Red Transmission Distance: 4
PLA BambuLab Cyan Transmission Distance: 2.3
PLA BambuLab Basic Blue Gray Transmission Distance: 3
PLA BambuLab Basic Yellow Transmission Distance: 6
PLA MATTE Esun White milk Transmission Distance: 1.6
This print uses 6 unique filaments

!!!! It appears you have mixed filament types. Be certain this is what you want. !!!!!

Swap Instructions:
Start with Black
At layer #8 (0.72mm) swap to Red
At layer #13 (1.12mm) swap to Cyan
At layer #16 (1.36mm) swap to Blue Gray
At layer #18 (1.52mm) swap to Yellow
At layer #22 (1.84mm) swap to White milk for the rest.