Dandadan Hueforge

Would love to see your prints!

Every boost helps me create more hueforges and give back to the community! :)

Okarun from Dandadan anime Hueforge

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 178.21x200mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.2mm and the Actual Depth is 2.2mm

Filaments Used:
PLA PolyLite Black Transmission Distance: 0.3
PLA BambuLab Basic Red Transmission Distance: 4
PLA BambuLab Basic Brown Transmission Distance: 2
PLA BambuLab Basic Jade White Transmission Distance: 5
This print uses 4 unique filaments

Swap Instructions:
Start with Black
At layer #12 (1.04mm) swap to Red
At layer #18 (1.52mm) swap to Brown
At layer #19 (1.6mm) swap to Jade White for the rest.

Descrição