Created this initially to update my old, tired icicle lights that I usually hang on my house. I ended up creating 4 different lengths (short, medium, long and max), 3 different hole sizes (small, medium and large), and 2 different wall sizes (thick and thin). All of these iterations are provided in the print profile.

I then realized that i created a bottom (or a top?) to the icicles so i provided print plates where the icicles are shifted -6 mm in the “z” direction. This cuts off the bottom 6 mm and provides an opening in the icicles to insert the lights. The larger diameter icicles are 200% in the “x” and “y” direction, so i guess the scaling is really up to you and what you want.

As i always say with my designs, the thin wall and large hole voronoi icicles are very fragile! Please remove carefully to avoid broken parts. If you are concerned, print one or just go with the thick wall style. I printed these in Kingroon PETG translucent on a Frostbite plate and everything worked great.

If you like this style please check out my other voronoi winter themed models:

[https://makerworld.com/en/models/813004#profileId-754765](https://makerworld.com/en/models/813004#profileId-754765)

[https://makerworld.com/en/models/778697#profileId-726310](https://makerworld.com/en/models/778697#profileId-726310)

I adde a few pictures with fairy lights.  My wife wants me to expand the diameter to use as candles.  I just cut the bottom off with a snips.