This is the hConsole, a portable cyberdeck that you can build yourself, it is hold together using 6 M2 screws and brass inserts and it is powered by a Raspberry Pi 4 model B. This is the complete list of parts to make one yourself:

• 6xM2 8mm Screws
• 6xM2 brass inserts
• 1x Waveshare 5 inch Touchscreen Monitor for Raspberry Pi DSI LCD Screen 800×480
• 1x Xbox 360 Chatpad keyboard
• 1x Seeed Studio XIAO SAMD21 (code here: [https://github.com/frequem/Chatpad](https://github.com/frequem/Chatpad))
• 1x Pisugar S Pro Portable 5000 mAh
• 1x Raspberry Pi 4 Model B or Raspberry Pi 5 Model B
• 1x USB 3.1 Type C Male with VCC, D+, D- and GND pads to solder
• Wires, lead and solder iron to connect everything together.

Attributions:

USB Cap: rovanni at [https://www.thingiverse.com/thing:3575374](https://www.thingiverse.com/thing:3575374)

Button and Switch 3D models: [https://github.com/PiSugar/PiSugar/tree/master/model_pro](https://github.com/PiSugar/PiSugar/tree/master/model_pro)

Edit 08/24/2023: Files Version 2.2 - Printing with resin I had the need to improve the Chatpad Keyboard fitment, it is now PERFECT!

The Xbox 360 controller will be soldered to the Seeed Studio XIAO SAMD21 as explained by Frequem on his Github, then the Seeed SAMD21 will be connected via USB to the Raspberry Pi, to do that connection I soldered the D+ to the TP10 and the D- to the TP6 testing pad at the back of the Raspberry Pi. the GND and the 5v VCC I connected directly to the GPIO 5V and GND pins (the D+, D-, 5v VCC, and GND I mention are the pads of the male USB-C breakout I listed above). Because the keyboard is always connected to the TP10 and TP6, make sure you cover the upper USB 2.0 port with the USB cap, so you don't use it with something else.