Print at 100% infill with a layer height of 0.08mm with a base layer of 0.28mm

The Model is 46.45x160mm in size
You may print at higher layer heights below the Min Depth of 0.52mm
 

Filaments Used:
PLA Turtle Green Transmission Distance: 2
PLA Turtle Black Transmission Distance: 0.3
PLA Creality CR White Transmission Distance: 6
 

Swap Instructions:
Start with Green
At layer #8 (0.84mm) swap to Black
At layer #11 (1.08mm) swap to CR White for the rest.
 

Check my other bookmarks