A thin Miyoo Mini Plus case that protects your console without adding bulk!

Print without supports, no extra hardware needed!

Modify to your liking with the provided step file!

Assembly is easy!

1. Put together the 2 parts.
2. Insert a 1.75mm filament to the hinge holes. You may push the filament just as the outer and inner part of the hinge connect and not all the way through as the tolerances can be tight due to printing without supports.
3. If you find inserting a filament troublesome, you may first loosen the holes with an allen wrench or screwdriver but be careful with the rear part! It may break with the layer line as it's printed upside.