Print at 100% infill with a layer height of 0.08mm with a base layer of 0.28mm

The Model is 44.95x160mm in size
You may print at higher layer heights below the Min Depth of 0.52mm
Actual Depth is 2.5mm

Filaments Used:
PLA PolyLite Black Transmission Distance: 0.3
PLA Creality CR White Transmission Distance: 6
PLA BambuLab Basic Pink Transmission Distance: 8

This print uses 3 unique filaments

Swap Instructions:
Start with Black
At layer #6 (0.68mm) swap to CR White
At layer #14 (1.32mm) swap to Pink
At layer #22 (1.96mm) swap to CR White for the rest.

Check my other bookmarks