Print at 100% infill with a layer height of 0.08mm with a base layer of 0.28mm

The Model is 44.95x160mm in size

You may print at higher layer heights below the Min Depth of 0.52mm

The Max Depth is 2.6mm and the Actual Depth is 2mm

Filaments Used:

PLA BambuLab Basic Black Transmission Distance: 0.6

PLA BambuLab Basic Green Transmission Distance: 2

PLA BambuLab Basi Jade White Transmission Distance: 5

This print uses 3 unique filaments

Swap Instructions:

Start with Black

At layer #11 (1.08mm) swap to Green

At layer #14 (1.32mm) swap to White for the rest.

Check my other bookmarks

New autumn bookmarks!!!

Part 2 available here