口³ 线的立方桌面时钟 Line Cube Clock

2018年，我曾手工制作了一个桌面时钟，设计主题是线条的运动与面。如今，我用3D打印技术重新制作了这款时钟，并结合创客宝库的配件，将这个时钟模型分享给大家。

In 2018, I handcrafted a desktop clock with the design theme of the movement and surface of lines. Now, I have remade this clock using 3D printing and combined it with accessories from Maker Treasure to share this clock model with everyone.

安装步骤：

1、将钟表芯放入外壳并拧紧固定螺丝。

2、将打印好的分针与时针卡入钟表芯转轴，时针为中间两线距离较宽的方框，分针为中间两线距离较窄的方框，秒针为中间单线有圆圈的方框。

3、将秒针的两端折断，留下圆形部分，卡入秒针凹槽中（可使用胶水增加稳固程度），并安装秒针。

Installation steps:
1. Place the clock core into the casing and tighten the fixing screws.
2. Insert the printed minute and hour hands into the clock core shaft. The hour hand is a box with a wider distance between the middle two lines, the minute hand is a box with a narrower distance between the middle two lines, and the second hand is a box with a circle on the middle single line.
3. Break the two ends of the second hand, leaving a circular part, and insert it into the groove of the second hand (glue can be used to increase stability), and install the second hand.

安装好指针后，请调整指针，使三个指针尽量处于平行状态，这样做有助于钟表的正常工作。

After installing the pointers, please adjust them so that the three pointers are as parallel as possible, which will help the clock work properly.

此模型提供两种表壳，一种为光面表壳（打印文件盘1），纯粹且显得风格统一；另一种为带有十字刻度的表盘（打印文件盘3），方便读取时间，大家可以按照自己的需求下载。

This model offers two types of watch cases, one is a glossy case (print file tray 1), which is pure and appears to have a unified style; Another type is a dial with a cross scale (print file tray 3), which is convenient for reading the time. You can download it according to your own needs.