Electronics Development Station

This is my Electronics Development Station
It's a breadboard unit that houses 2x 640-pin breadboard, including 5x Power Supply for all your electronics needs
It has:

• 3.3 Volt rail
• 5.0 Volt rail
• 12.0 Volt rail
• 2x self-selectable rail (DPS5005 Power Supply with voltage and current setting)
• GND-rail

With 1280 Pins for your components, there is more than enough space for your all your electronics components.

Bill of Materials

• 1x Mean Well LRS-350-24 PSU
• 2x DPS5005 PSU (with BT and USB if needed)
• 3x LM2596 Buck Converter
• 6x Female header pins (strip)
• 4x Banana type sockets (2x Black - 2x Red)
• European Mains Power Socket WITH fuse
• 8x Screw M3 x 25
• 8x Brass Heat Insert Nut M3
• Some wires in different colors to connect everything (colors depending per country)

For the calibration of the LM2596 Buck Converters you will need a trustworthy Volt Meter.

Also, see my complete collection of PCB holders here:
[https://makerworld.com/en/collections/3142382](https://makerworld.com/en/collections/3142382)