Back Story

Going down nostalgia lane. This is one anime my wife and I share. Enjoyed it. Like the look and tone in this pic. This is how I remember Alucard to look - the glasses, the cross on the necklace, the reds…missing is the gun.

Helsing Alucard
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 143x220mm in size. 
 

Can be resized to accommodate your printer or preference by adjusting the X and Y axis the same percentage while leaving the Z axis at 100%. The best way to achieve this: With Uniform Scale checked, adjust the Y axis to the desired size (180max for A1 mini and 250max for P1/X1, this will ensure the X axis is the same proportion as the Y axis), uncheck the Uniform scale, adjust the Z axis back to 100%, slice plate, and print. Stringing may occur with HueForge, just use a lighter to whisk them away.
 

Filaments Used:
PLA BambuLab Basic Black Transmission Distance: 0.4
PLA Esun Engine Red Transmission Distance: 5
PLA BambuLab Basic Red Transmission Distance: 4
PLA BambuLab Basic Yellow Transmission Distance: 6
PLA BambuLab Basic Jade White Transmission Distance: 5
This print uses 5 unique filaments

Swap Instructions:
Start with Black
    At height depth (0.8mm) swap to Engine Red
    At height depth (0.96mm) swap to Red
    At height depth (1.28mm) swap to Yellow
    At height depth (1.6mm) swap to Jade White for the rest.

This is a five color HueForge. Use this tutorial by Cloudy Nostalgia to print more than 4 colors on 1 AMS.