Please leave a rating, comment or boost if you like the print!

Want to sell my prints? Commercial License now available here: [https://patreon.com/3ReePrinting](https://patreon.com/3ReePrinting)

Not sure how many Attack on Titan prints I'll end up doing, Levi was a follower request. Let me know if you want me to take a crack at more! This print is the maximum build plate size for an A1 Mini, but it should work on any printer!

If you resize the model make sure you do NOT scale the Z axis or the print colors will not be in the same position

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 170x170mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.2mm and the Actual Depth is 2.3mm

Filaments Used:
PLA BambuLab Basic Black Transmission Distance: 0.6
PLA BambuLab Basic Green Transmission Distance: 2
PLA BambuLab Basic Yellow Transmission Distance: 6
PLA BambuLab Basic Jade White Transmission Distance: 5
This print uses 4 unique filaments

Swap Instructions:
Start with Black
At layer #7 (0.64mm) swap to Green
At layer #13 (1.12mm) swap to Yellow
At layer #17 (1.44mm) swap to Jade White for the rest.