Updated V2 (12/25/24) Version 2 Changes:

     Side pods width reduced by .8mm to address concerns that they fit too tightly. (I still prefer the original)

     All parts included in one profile. Please print the caps and funnel based on the material you're using.

     A few minor structural tweaks from the original.

Previous update Two new print profiles specifically for PLA/PETG and ABS/ASA. Faster print and updated threading for a better cap and funnel fit with PLA/PETG. 

AMS desiccant pods. Super cool design. Easy print with NO supports. Internal hidden cross bars for strength. Bottom fill with threaded cap and funnel. I wanted some new desiccant containers for my AMS and could not find any that suited me, so…I created my own. AMS desiccant/silica containers are a must, so why not print a set with style. Vertical beams run from the bottom of the front all the way to the bottom of the back making the top look especially good while installed in the AMS.

For those of you that printed the original model in PLA or PETG and found the caps and funnel threading a tight fit, you can just print the cap and funnel from the PLA/PETG profile for a better fit. The containers are unchanged from the original, just the threading on the caps was adjusted.

Thanks everyone!