This model allows you to attach a Multiboard storage wall panel to the side of the AMS Riser V2 by maCyo42. It is a remix of HSW for AMS Riser V2 (Honeycomb Storage Wall) by Yoav Kadosh.

For a full side panel, you'll need:

• 2x 6x6 Core Tiles
• 3x 6x6 Side Tiles
• 1x 6x6 Corner Tile

For the connecting the tiles you will need:

• 6x Dual Snap Connector Part A
• 6x Dual Snap Connector Part B
• 2x Quad Snap Connector Part A
• 2x Quad Snap Connector Part B

Alternatively, with the Simple Tile Generator, you can use 7x6 Tiles. Or depending on your printer size, you could use any combination up to a 14x18 grid.

You'll need to use the double sided snaps because the offset mounts are too thick for the AMS Hanger.

I'll be adding more Multboard, Multiconnect, and Gridfinity compatible accessories for various tools, smart home devices, networking devices, and more in the future. Be sure to follow me to keep updated with my releases. Cheers!

Credits and thanks to:
Keep Making/Jonathan for MultiBoard

maCyo42 for the AMS Riser V2

benlevi for the original BLV - AMS Riser for X1C / P1P / P1S V3.1 Final

Yoav Kadosh for the HSW for AMS Riser V2 (Honeycomb Storage Wall)