The BB Wrist Shooter!

This Wrist Shooter operates using BB's rather than my usual custom made projectiles. Because of this, the design relies on a bolt-action system. Enjoy!

Inspiration came from @user_2058651879 who specifically requested a BB version.

OPERATING INSTRUCITONS:

1. pull the bolt action down and to the right until it is clicked into place.
2. insert a BB into the circular cutout along the bolt action rail.
3. when the trigger has covered the path of the BB fully, release the bolt action. The launcher is now fully cocked. DO NOT point at eyes/face.
4. when ready to fire, simply pull the string- this will clear the trigger from the path and release the BB.

NEEDED ITEMS:

1. m3x12 screw (x1)
2. m3 Nut (x1)
3. 5.55 x 38.1 compression spring. Can also use most pen springs.
4. Rubber band/Tension spring.
5. Elastic/Velcro for the band.

ASSEMBLY:

1. Begin with gluing the cylinder to the wrist mount. To help, align the circle on the back of the cylinder with the wrist mount's hole.
2. Insert the spring, and then insert the bolt action cylinder- ensure the bolt action is placed flat side down.
3. Glue the bolt action lever into the square hole on the bolt action cylinder. This completes the bolt action assembly.
4. Place the hex nut in the wrist mount and screw the trigger onto the contraption. Then, use a rubber band/spring to pull the trigger toward the cylinder. This helps the firing mechanism work smoothly.
5. Tie your string to the trigger arm.
6. Sew/glue your elastic/velcro to the wrist mount.