The included 3MF has all the necessary settings and filament swaps applied to the print if you use Bambu Studio.

If you resize this print, please do not alter the Z height. Only alter the X and Y dimensions.

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used :

• PLA BambuLab Matte Charcoal Transmission Distance: 0.6
• PLA BambuLab Basic Blue Gray Transmission Distance: 3
• PLA PolyTerra Earth Brown Transmission Distance: 0.3
• PLA PolyTerra Pastel Peach Transmission Distance: 3.5
• PLA BambuLab Matte Ivory White Transmission Distance: 3.5

Swap Instructions:

• Start with Charcoal
• At layer #12 (1.04mm) swap to Blue Gray
• At layer #15 (1.28mm) swap to Earth Brown
• At layer #19 (1.6mm) swap to Pastel Peach
• At layer #23 (1.92mm) swap to Ivory White for the rest.