Update: I created a new mounting adapter for the lampshade that clicks into place now. You can find it here: 

[https://makerworld.com/en/models/1055982#profileId-1043512](https://makerworld.com/en/models/1055982#profileId-1043512)

About

I designed a set of lamp shades that I can use with my “A1 compatible" lamps. However, I also designed it in a way, that you can use the lamp shades with any other light fixture that fits through a 15mm hole.

The shades are very nice to substitute the popular christmas sterne outside of Christmas season.

Printing

The shade itself should be printed in vase mode.

My shared print profile includes a negative cylinder to cut out the hole for the lamp.

When printing, make sure to include the cylinder.

Also you will need to print this mounting plate: [https://makerworld.com/en/models/1055982#profileId-1043512](https://makerworld.com/en/models/1055982#profileId-1043512)

For stronger prints I recommend using a 0.6mm nozzle or increasing the line width.

After printing the shade and the adapter you just have to pass the light fixture through the hole of the shade to plug into the adapter and then hang the lamp.

If you have a star with a different color but white, I recommend printing the alternate top cap by Daniel: 

[https://makerworld.com/en/models/941343?from=search#profileId-907138](https://makerworld.com/en/models/941343?from=search#profileId-907138)

Happy printing!

You can also check out my other designs:

Lamp Shade - Cylinder Fin

Lamp Shade - Sphere Ripple

Lamp Shade - Cylinder Ripple

Lamp Shade - Bell Fin

Lamp Shade - Cylinder Waves

Lamp Shade - Spherical Fin