Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 161.67x240mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.2mm and the Actual Depth is 2.2mm

Filaments Used:
PLA Kingroon Black Transmission Distance: 0.4
PLA Kexcelled Light Purple Transmission Distance: 1.4
PLA Kexcelled Fluorescent Yellow Transmission Distance: 8
PLA Kingroon White Transmission Distance: 5.8
This print uses 4 unique filaments

Swap Instructions:
Start with Black
At layer #11 (0.96mm) swap to Light Purple
At layer #13 (1.12mm) swap to Fluorescent Yellow
At layer #21 (1.76mm) swap to White for the rest.