I saw this hammer while watching Arcane 2, Jayce tries to attack with it.

我看双城之战2时看到了这把锤子，杰斯尝试用它攻击。

I spent three days trying to model with Fusion and it looks very much the same.

Jayce's weapon is huge and I'll probably finish it in 1 month.

我花了三天时间尝试用Fusion建模，看起来一模一样。

杰斯的武器非常巨大，我可能会在1个月后完成。

Assembled according to the picture.

按照图片装配。

Now 2024/11/15 and I've come up with a way to change the length of the hammer shank in Bambu Studio. I cut the hammer shank into three parts. Avoid changing the threads.

现在是2024/11/15，我想到了在Bambu Studio中改变锤柄长度的方法。我把锤子柄切成了三个部分。避免改变螺纹。

To change Xmm, move the top part Xmm and the middle part X/2mm, then change Xmm on the Z axis of the middle part. I will demo add 10mm.

要改变Xmm，就要移动上部Xmm和中部X/2mm，然后在中部的Z轴上改变Xmm。下面我将演示增加10mm。

I moved the top part by 10mm and the middle part by 5mm. added 10mm to the Z-axis of the middle part. Be careful not to check uniform scale. This way you can print the length that suits you.

我移动了上面的部分10mm，中间的部分5mm。在中间部分的Z轴上增加了10mm。注意不要勾选等比例缩放。这样你就可以打印适合自己的长度。

Similarly, if the hammer head is difficult to install, can change X and Y axes. 

同样的，如果锤头难以安装，可以改变X和Y轴。

This will introduce a slight angle change, but will not affect the installation. 

这样会带来轻微的角度改变，但不会影响安装。