Modular / Stacking / Reconfigurable Drawer System.

this is a nice set of drawers that can easily be assembled to fit many needs, there is a standard drawer and a shorter drawer. they can be configured as your needs change. Start with 1, expand to 4 if needed.

Check out the photo of the components to see what's there. Very easy assembly and no tools or Glue Required!!

if you have any questions,  please feel free to ask or leave a comment below.  

Don't forget to check out the other print profiles for the other drawer styles and knobs.  information on them is below..    

Note:

You can change the materials to whatever you like to use. I do suggest that you turn the bed temp to 60c for better adhesion and less change of the edges lifting. I would also recommend that you turn the auxiliary fan off during these prints. you'll have much better success with them not lifting. Liquid glue is recommend on a textured PEI plate as well. I didn't have any failures while printing these.

Size:

Cabinet Size

225mm wide x 183mm Deep.

Drawer interior size

93mm wide x 160mm Deep

I have 2 different drawer styles that are currently available.

Style 1 Drawers.  These Drawers can be stacked in any order.   Currently only Knob V1 fits this drawer as it's beveled to go around the diamond pattern. 

Style 2 Drawers (with V3 Knob)  these drawers can be stacked in any order.

Style 3 Drawer (With V4 knob).  Depending on how you want to stack Style 3,  there are 2 different top drawers,   and 2 different bottom standard drawers that line up with each other,   then you can use the smaller top drawers to complete the look.  See reference below.

Style 4 Drawer (with V2 Knob)   depending on how you want to stack Style 4,  there are 2 different top drawers,   the bottom standard drawers line up with each other,   then you can use the smaller top drawers  See reference below.

Stack of Style 4 Drawers  (2 standard drawers,   1 Small Bottom,  1 Small Top.

there are different knob styles to fit your needs as well, so you can choose the one you want.