Alien Hello Kitty

tips & info:

• Please use my profile as they are tuned with the correct support needed for a proper print.
  • i have tuned the profile to use as little support as possible so its much easier to remove and keeping a quality print.
• Print more than 1 just incase one fails you still have the other one =) it only adds about 10-15% extra time for each one you add
  • use any color you like.
  • Scale it up as big as you like.
• Simple way to gain some quality without adding lot of time is to change layer height as it only adds about 5-10% extra time.
• Please use pliers to remove the supports from main body.
• Be careful when removing the support from the head antennas.

Assembly is straight forward

the parts can be pressed fit but i suggest using glue to connect the head to body, so it doesn't fall off and break the antennas.

filament length used (65-70mm) for the UFOs

( Please keep in mind that all printers and filaments are different. they can vary in tolerance and shrinkage)

Coloring:

• use the “Fill” tool along with "Smart fill angle" slider to get best results when coloring the model.

Filaments used:

Bambu Green

Bambu Mistletoe Green

Bambu Matte Black

Elegoo Sakura Pink

Elegoo Silk silver