Interested in selling my models? Check out my Patreon for a commercial license! 

[https://patreon.com/JustJoel?utm_medium=unknown&utm_source=join_link&utm_campaign=creatorshare_creator&utm_content=copyLink](https://patreon.com/JustJoel?utm_medium=unknown&utm_source=join_link&utm_campaign=creatorshare_creator&utm_content=copyLink)

PHD Flopper Machine

From COD Black Ops

Assembly is straightforward.

1. Most parts are press-fit, but if any parts are loose, a small dab of glue will help.
2. The body and upper body should be a press-fit but glue can be used.
3. The “coin slot part” should also be press-fit. However, if it is loose, a small dab of glue will help.
4. All parts are colored for the multicolored design. Printing in multiple colors is not required, but it makes the parts look much nicer.
5. If you're having issues with a press fit part, please remove the supports fully.
6. The rods attached to the PHD logo are finicky to assemble. I highly suggest assembling the yellow dots and rods before attaching them to the PHD logo. I also suggest twisting the rod back and forth when inserting it into the PHD logo, as this will help assembly.
7. The golden dots should also be press-fit but a small dab of glue will help if you're having trouble assembling.
8. Happy printing!

Juggernog: [https://makerworld.com/en/models/800524#profileId-740431](https://makerworld.com/en/models/800524#profileId-740431)

Speed Cola: [https://makerworld.com/en/models/728372#profileId-659910](https://makerworld.com/en/models/728372#profileId-659910)

Double-Tap: [https://makerworld.com/en/models/753119#profileId-687052](https://makerworld.com/en/models/753119#profileId-687052)

Filament used:

Purple: Bambu PLA-CF Purple

Gold: Bambu PLA Gold

Grey: Bambu Matte PLA Grey

White: Bambu Matte PLA White

Red: Bambu Matte PLA Red

Green: Bambu Matte PLA Green