Mac Mini M4 wall mount. Printed from PLA (support interface made from PETG). You can use for wall mounting 3pcs M4 wood screws or strong double side tape.

I used this orientation for easy air flow and also power button accessibility. After some time of the testing, also top surface (ie. power supply side) is cool.

Link to source file: [https://cad.onshape.com/documents/9ee034c8403a083b46b0cb2d/w/98a480e43f7baa076db694fe/e/c8d927648f2b276786a65a6a?renderMode=0&uiState=6732383666bb9a7240564822](https://cad.onshape.com/documents/9ee034c8403a083b46b0cb2d/w/98a480e43f7baa076db694fe/e/c8d927648f2b276786a65a6a?renderMode=0&uiState=6732383666bb9a7240564822)

18.9.2025 edit: I figured out, that current version of the Bambustudio (2.2.085) change support shape and location. Ignored “on build plate only” and so on. Be careful with it.

6.4.2026 edit: supports are designed with a separation layer made of different materials (PLA vs PETG). If you want to print it without separation layer, you have to change support settings and put there some small gap between support and model.