A Pokemon-inspired box for holding anything you want ! 

The original version is a really nice decoration, but it was limited to Game Boy cartridges and I wanted a bit of variation so I could  have multiple boxed side by side without them being identical.

It includes a print-in-place hinge to make assembly easy. The number of parts to be printed depends on the version.

There are two versions of the magnetic locking system :

1. One that requires 2 rectangular magnets 20mm x 5mm x 2mm to help hold the case closed. Here's a link to the magnets the original creator bought on Amazon (US).

2. A second one using 4 circular magnets 3x8mm. Here's a link to the magnets I purchased on Amazon (FR).

    

Poké Ball (files to print) : 

1. PokeBox - Poke Ball - Top Cap.stl (red)
2. For the Middle Part (the black piece that includes the hinge), choose between : “PokeBox - Middle Part A - Rectangular Magnets 20x5x2mm.stl” or “PokeBox - Middle Part B - Circular Magnets 8x3mm.stl” 
3. PokeBox - Bottom Cap.stl (white)
4. PokeBox - Button.stl (white)

Great Ball (Super Ball) : 

1. PokeBox - Great Ball - Top Cap - Part 1.stl (Blue)
2. PokeBox - Great Ball - Top Cap - Part 2.stl (Red) (Print 2X)
3. For the Middle Part (the black piece that includes the hinge), choose between : “PokeBox - Universal Middle Part A - Rectangular Magnets 20x5x2mm.stl” or “PokeBox - Universal Middle Part B - Circular Magnets 8x3mm.stl” 
4. PokeBox - Bottom Cap.stl (white)
5. PokeBox - Button.stl (white)

Ultra Ball (Hyper Ball) : 

1. PokeBox- Ultra Ball - Top Cap - Part 1.stl (Black)
2. PokeBox-  Ultra Ball - Top Cap - Part 2.stl (Yellow)
3. For the Middle Part (the black piece that includes the hinge), choose between : “PokeBox - Universal Middle Part A - Rectangular Magnets 20x5x2mm.stl” or “PokeBox - Universal Middle Part B - Circular Magnets 8x3mm.stl” 
4. PokeBox - Bottom Cap.stl (white)
5. PokeBox - Button.stl (white)

Honor Ball :

1. PokeBox - Poke Ball - Top Cap.stl (White)
2. For the Middle Part (the red piece that includes the hinge), choose between : “PokeBox - Middle Part A - Rectangular Magnets 20x5x2mm.stl” or “PokeBox - Middle Part B - Circular Magnets 8x3mm.stl”
3. PokeBox - Bottom Cap.stl (white)
4. PokeBox - Button.stl (red)

All parts can be attached to each other with basic super glue. 

Happy Pokéballing !