Let's play checkers! This checkerboard folds and fits neatly into the provided case, along with all of the checkers. Squares are 30mm x 30mm.

There are four plates. Plates 1, 2, and 3 can be printed at default settings with a prime tower. The board on plate 4 fills the print bed, so the prime tower must be disabled before printing plate 4.

It is possible to print all 4 plates with the prime tower disabled. The prime tower helps keep the color changes clean. That choice is up to you.

The switch for the prime tower is under Global – Others – Prime Tower – Enable. It is currently disabled.

The checkerboard is printed face down. If you do any color changes in the slicer, check to see that the bottom side of the board still has the colored squares before printing. It is best to do any color changes in the dialog box that pops up when you press “Print Plate” rather than in the slicer settings.

If you are printing on a P1S or X1C you may need to adjust some settings to utilize the full 256mm build volume.  You can read how to do that in a Wiki article here. Another option is to resize the model to 95% to make it fit in your usable volume.