This model is for personal use, If you want to support my work and get access to a commercial license you can do so on my patreon

You can also check up upcoming models on my Instagram

V2

-Changed the position of the brown spots for better printing
-Added quick connector for easier assembly of the spots
-Bigger parts for the face for better printing and easier assembly

Ok the last planter was pretty popular so here is a third one, sorry but I had to do a cat.
It should be quite easy to print and is available in two version, an assembled one (if you don't really care about waste) and a version to assemble yourself.

It should fit most 5cm pots but I’ve added one that you can 3D print if necessary.
Most part should assemble without glue, but for the one that need some I would advise on using CA glue (or 3D gloop if you have access to it).

You don’t need any supports for this print, I’d advise on using adaptative layers Also scaling it up will work.

The example model was printed on an X1, with a 0.4 nozzle and with a no name wood PLA, overture Black, and overture white.

Let me know if you encounter any issue in you prints so I can help you fix it.