我製作了各種尺寸的六邊形展示架，從100mm高，到220mm高,各種尺寸之間共用同一個連結器，連結器尺寸為40mm長，透過不同大小的六邊形展示架，你可以創造更豐富的展示牆面。

照片中展示的尺寸為150mm，是A1 mini可以列印的極限尺寸，專門為Cutie1 玩具系列打造。

目前有五種尺寸版本，若有更小尺寸的需求，請提出，我會設計更小尺寸的版本。

I created hexagonal display stands in various sizes, ranging from 100mm to 220mm in height. All sizes use the same connector, which is 40mm long. With hexagonal display stands of different sizes, you can create a more dynamic display wall.

The size shown in the photo is 150mm, which is the maximum printable size for the A1 mini, designed specifically for the Cutie1 toy series.

There are currently five size versions available. If you need a smaller size, please let me know, and I will design an additional, smaller version.

---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------

首先感謝大家對此模型的支持，當初我不太會操作makerworld的文件配置，單一個檔案裡面只有一個尺寸，我會重新規劃列印配置，重新上傳。

2026/05/22，我將對此模型新增一些新配件提供選擇。

1.新增了半塊六邊形蜂巢的模型，如果有些人只需要兩排，可以透過這個半塊六邊形去補強連結。

2.新增90度連接模組，提供了兩種版本，一種是簡易型的連結方式，此連結模組非常省料，另一種是色塊型的連結模組，使用料較多，但是整體效果非常棒。

3.新增支撐插銷模組，提供了兩種版本，一種可以透過雙面膠黏著，如果你選擇此模組可以在上六邊形的某些部分補強讓其貼合牆面，不建議讓整座六邊形蜂巢展示架懸空。
另一種是提供了螺絲鎖固模組，如果你使用這種模組，請使用膨脹螺絲，也不建議擺放重物，請注意承重問題。

4.新增了抽屜模組，有些使用者想要抽屜，請您先考慮承重問題，推薦存放模型與玩具的替換配件，比較沒有承重問題。

5.新增了鎖固牆壁吊掛模組，此模組必須先將A零件鎖固至牆壁上，然後套上B零件，透過此單元可以串聯起其他六邊形單元。

吊掛模組提供了兩種形式，一種請透過膨脹螺絲直接鎖固在牆壁上，另一種則支援IKEA 的 skadis 洞洞板， 透過專用的卡榫可以直接裝上洞洞板。

請注意，零件B是專門為了鎖固牆壁套件調整，所以他的厚度是75mm，加上零件A的厚度5MM，總和是80MM，等於是原先六邊形單元體的厚度，請注意這個細節。
 

PS.目前只更新150mm版本相關的配件組，如果需要其他尺寸，我會後續補上。

First of all, thank you everyone for supporting this model. When I first uploaded it, I wasn’t very familiar with MakerWorld’s file organization system, so each file only included a single size version. I’ll be reorganizing the print configurations and re-uploading the files.

### 2026/05/22 Update

I will be adding several new accessory modules for this model:

1. **Half Hexagon Honeycomb Module**
  A half-size hexagon honeycomb piece has been added. If you only need two rows, this module can be used to reinforce and extend the connection.

2. **90-Degree Connector Module**
  Two versions are provided:

  * A simple connector version that uses very little material.
  * A block-style connector version that uses more material but provides a much better overall appearance.

3. **Support Pin Modules**
  Two versions are available:

  * A double-sided tape version, which can be attached to the wall to reinforce certain parts of the upper hexagon modules and improve wall contact. It is not recommended to leave the entire honeycomb display structure suspended without support.
  * A screw-mount version for wall installation. If using this version, please use wall anchors. Heavy objects are still not recommended, so please pay attention to load capacity.

4. **Drawer Module**
  Some users requested drawer storage, so a drawer module has been added. Please consider weight limitations before use. It is recommended for storing lightweight model or toy accessories rather than heavy items.

5. **Added a wall-mount hanging module.**
  This module requires Part A to be mounted to the wall first, then Part B can be attached onto it. Using this module, you can connect and extend additional hexagonal units together.
Two types of hanging modules are provided. One version is designed to be mounted directly onto a wall using wall anchors and screws, while the other version supports the IKEA SKÅDIS pegboard system and can be attached directly using the dedicated locking clips. 

Please note that Part B has been specifically adjusted for the wall-mount module, so its thickness is 75mm. Combined with the 5mm thickness of Part A, the total thickness becomes 80mm, which matches the thickness of the original hexagonal unit. Please pay attention to this detail.

P.S. Currently, only the accessory modules for the 150mm version have been updated. If other sizes are needed, I will add them in future updates.

90度連接模組_1

90-Degree Connector Module_1

90度連接模組_2

90-Degree Connector Module_2

鎖固牆壁吊掛模組

wall-mount hanging module

支援IKEA 的 skadis 洞洞板