没有找到合适的外壳自己画了一个，可以放下14awg的线。用硅胶或者别的胶水固定（最好是半固体胶）中间孔洞使用m3*8的圆头内六角螺丝和m3螺母进行固定，螺母直接压到一边的孔中即可（螺母的最大直径于圆孔最大直径相等）。请根据使用环境选择petg及abs等耐高温材料打印！

安全声明：大功率不保证受热变形起火，如有安全事故发生本人不承担任何相关责任
 Didn't find a suitable shell and drew one yourself, you can put down the line of 14awg. Fix the hole with silicone or other glue (preferably semi-solid glue), use M3*8 round head hexagon screws and M3 nuts to fix the middle hole, and the nut can be pressed directly into the hole on one side (the maximum diameter of the nut is equal to the maximum diameter of the round hole). Please choose high-temperature resistant materials such as PETG and ABS according to the usage environment!

Safety Statement: High power does not guarantee that it will be deformed by heat and cause fire, and I will not assume any relevant responsibility if there is a safety accident

更新xt60公头

这次我用了一根6毫米直径的硅胶线，完美适配。在母头的基础上改的和母头安装差不多，需要用m3*10的圆头螺丝