Here is a Revamp of Ratchet Belt 1.0!

What You Need to Know Before Printing:

-This Model Requires TPU Plastic

-When printing the buckle, select a more rigid filament type. As I have experimented with a variety of filaments, PLA doesn't always work. Only the rigid filaments like certain PLA, ABS, and PETG will yield good results and tension.

-I Highly Recommend Using my Print Profiles as there are certain niche settings that need to be in place for (hopefully) optimal printing.

What You Need to Know After Printing:

-Wait for the Buckle to COOL COMPLETELY after printing. Not doing so could ruin the spring.

Included:

-2 Buckle Styles

-4 Belt Sizes

-Trusted Print Profiles

Pros/Cons:

-You'll be the cool person at parties.

-You'll be coerced into printing other people their own belts.

-No taking off the belt of shame at TSA.

-It's all plastic; the buckle isn't invincible, but it is replaceable.

-It's very flexible (duh). You could fold/bend this thing many times and it will (almost) always spring back.

**NEW AND OPTIONAL**

I have now added a theoretically customizable magnetic belt attachment print profile! Wow that's a lot of descriptive words!

Assembly and Detachment:

-Firmly Grip the two edges of the belt until it bends upwards. -Slide The belt into the bottom slot- making sure that the bend goes over the peg. -Once everything is aligned, give the belt a little push to secure everything.
-To remove the buckle, press firmly from the other side of the belt creating the bend again. - Squeeze the two edges of the belt as hard as you can while slightly pulling away from the buckle.

Happy Printing!