Be careful around the antennae when removing from the plate. I recommend using scraper to free them up gently.

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 150x150mm in size

You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.2mm and the Actual Depth is 2.2mm

Filaments Used:
PLA PolyLite Black Transmission Distance: 0.3
PLA BambuLab Basic Brown Transmission Distance: 2
PLA BambuLab Matte Grass Green Transmission Distance: 2
PLA+ Numakers Pure White Transmission Distance: 4.8
PLA BambuLab Basic Yellow Transmission Distance: 6

This print uses 5 unique filaments

Swap Instructions:
Start with Black
At layer #9 (0.8mm) swap to Brown
At layer #11 (0.96mm) swap to Grass Green
At layer #13 (1.12mm) swap to Pure White
At layer #17 (1.44mm) swap to Yellow
At layer #20 (1.68mm) swap to Pure White for the rest.