This is a simple drawer pull. It is designed to use 8-32 nuts and screws. There are two versions one with a slide in nut design and one with an embedded nut design. For a ¾" thick door use a 1" long screw. For a ½" thick door use a ¾" long screw.

For the embedded nut be sure to add a pause to insert the nuts.

There are 4 options for hole spacing.

1. 3"
2. 3 ½"
3. 3 ¾"
4. 4"

8-32 Nuts: [https://www.mcmaster.com/91841A009/](https://www.mcmaster.com/91841A009/)

1" Long 8-32 Screw: [https://www.mcmaster.com/91772A199/](https://www.mcmaster.com/91772A199/)

¾" Long 8-32 Screw: [https://www.mcmaster.com/91772A197/](https://www.mcmaster.com/91772A197/)

Washer for Number 8 Screw: [https://www.mcmaster.com/92141A009/](https://www.mcmaster.com/92141A009/)