V2 Version
Given the requests of some users, I decided to make a version with the back without the need for glue but with the use of screws. Choose the one you like most!! good print

link screws M1.4x6 mm

[https://it.aliexpress.com/item/1005005914565896.html?spm=a2g0o.order_list.order_list_main.105.3bf63696QtafUy&gatewayAdapt=glo2ita](https://it.aliexpress.com/item/1005005914565896.html?spm=a2g0o.order_list.order_list_main.105.3bf63696QtafUy&gatewayAdapt=glo2ita)

look at my lightbox test

[https://makerworld.com/en/models/850967#profileId-798995](https://makerworld.com/en/models/850967#profileId-798995)

Behind it is possible to insert a switch and a USB-C socket

I applied an aluminum tape to even out the light

List of necessary materials:

USB-C connector [https://www.amazon.it/dp/B0CL9F34GT?ref=ppx_yo2ov_dt_b_fed_asin_title](https://www.amazon.it/dp/B0CL9F34GT?ref=ppx_yo2ov_dt_b_fed_asin_title)

Switch [https://www.amazon.it/dp/B09QQKMWRR?ref=ppx_yo2ov_dt_b_fed_asin_title](https://www.amazon.it/dp/B09QQKMWRR?ref=ppx_yo2ov_dt_b_fed_asin_title)

LED strip [https://www.amazon.it/dp/B0B24NL224?ref=ppx_yo2ov_dt_b_fed_asin_title](https://www.amazon.it/dp/B0B24NL224?ref=ppx_yo2ov_dt_b_fed_asin_title)

• Preferences (ctrl + P) → activate developer settings → Quality → Advanced → First Layer Flow Ratio: 1.02
• Quality → Wall generator → Arachne
• Quality → Wall transitioning threshold angle → 50º
• Strength → Advanced → Infill/wall overlap → 20%
• Quality → Advanced → Avoid crossing walls
• I recommend always starting with the lighter colors.

• order of the walls external-internal