This is an awesome set of thick Star Wars coasters.

You can choose between 16 different coasters to print.

I have included a 8 coaster tray or a 6 coaster tray.

These can be decorated with with the included sides that you glue to the tray.

First glue the short ones and than the longer ones.

Print instructions:

Coasters:

Print at 100% infill with a layer height of 0.2mm with a base layer of 0.2mm

Filaments Used:
PLA BambuLab Basic Black Transmission Distance: 0.6
PLA BambuLab Blue Gray Transmission Distance: 3.2
PLA BambuLab White Transmission Distance: 9.6

Swap Instructions:
Start with Black
At layer #16 (1.2mm) swap to Blue Gray
At layer #18 (1.6mm) swap to White for the rest.

Side Strips Tray:
Print at 100% infill with a layer height of 0.2mm with a base layer of 0.2mm

Filaments Used:
PLA BambuLab Basic Black Transmission Distance: 0.6
PLA BambuLab Blue Gray Transmission Distance: 3.2
PLA BambuLab White Transmission Distance: 9.6

Swap Instructions:
Start with Black
At layer #6 (1.2mm) swap to Blue Gray
At layer #8 (1.6mm) swap to White for the rest.

All the designs i upload, i have to print first, and that's a lot of filament 😬 And filament isn't free..

So, if you like my work you could

buy me a coffee if you like. 😉

[https://www.buymeacoffee.com/a.vdh_83](https://www.buymeacoffee.com/a.vdh_83)

Or a donation via Paypal is also much appreciated.
[https://www.paypal.com/donate/?hosted_button_id=3KZUPFUG4KLUL](https://www.paypal.com/donate/?hosted_button_id=3KZUPFUG4KLUL)