My wife began asking that I design earrings for her and her friends. so I have created about 50 designs that I will slowly upload - so be on the lookout for new designs! Most can be printed with a .4 nozzle but for extra detail you may want to consider a .2 nozzle. I have printed these successfully on my P1S and A1 Mini. You will need earring hardware - i use the following kit from Amazon -- [https://www.amazon.com/gp/product/B09YV65J75/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&th=1](https://www.amazon.com/gp/product/B09YV65J75/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&th=1)

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 50.43x45mm in size

You may print at higher layer heights below the Min Depth of 0.48mm

The Max Depth is 2.2mm and the Actual Depth is 2.2mm

Filaments Used:

PLA BambuLab Matte Charcoal Transmission Distance: 0.6

PLA BambuLab Matte Scarlet Red Transmission Distance: 2

PLA Bambu lab Bronze Transmission Distance: 0.4

PLA BambuLab Matte Ivory White Transmission Distance: 3.5

This print uses 4 unique filaments

Swap Instructions:

Start with Charcoal

At layer #9 (0.8mm) swap to Scarlet Red

At layer #17 (1.44mm) swap to Bronze

At layer #22 (1.84mm) swap to Ivory White for the rest.