🌟 **Ultralight Compact Enduro Trail Jack ** 🌟

This custom-designed ultralight trail jack is made from aluminum tubing and can be fabricated using the downloadable model here. 🛠️ It’s an essential tool for motorcycles without a center stand, allowing you to lift the front or rear wheel of your enduro or adventure bike for planned or unexpected repairs and maintenance. 🏍️🔧

**Be Prepared for Any Situation** 🌍🔧

The ultralight compact trail jack is designed for emergency situations when repairs are needed, and no other lifting equipment is available. 🚑 By combining it with the side stand, you can easily remove a wheel to patch a flat tire, lubricate the chain, or perform other tasks where one of the wheels needs to be lifted off the ground. 🚲🔩 Its compact design makes it perfect for remote locations, ensuring you're always prepared for the unexpected on your journey. 🛤️🌄

**Unique Telescopic Design** 🔧📏

This trail jack features a 3-piece telescopic construction made from lightweight aluminum tubing, making it incredibly easy to store. 📦 At just 23.5 cm when folded, it fits neatly into most tool rolls. The design includes three sliding aluminum tubes, a support yoke at the top, and a flexible, anti-slip rubber foot ( Print in TPU) at the base, the parts slide into one another. 🧳✅

**Engineered for Stability** ⚖️✔️

The 90-degree yoke at the top of the trail jack offers a wide, flat surface to provide stable support under the swing arm. 💪 Additionally, the vertical part of the yoke can hook into a vent hole in your motorcycle’s skid plate.

**Key Features:**

- Fabricated from durable aluminum tubing using the downloadable model 📲⚙️
- Collapsed length: 23,5 cm 📏, weighs just 145 grams ⚖️
- Specially designed 90-degree yoke provides stable support for the swing arm 🏍️✔️
- Maximum length: over 49 cm – suitable for most enduro or adventure bikes 🛠️
- Anti-slip rubber foot (TPU) ensures stability on hard surfaces like asphalt or rocks 🪨🛣️
- Compact design fits into popular tool rolls like Mosko, Kriega, and Enduristan 🎒

With this custom aluminum trail jack, you're ready for any unexpected repair—no matter where your adventure takes you! 🌍🏍️✨

What do I need :

• PAHT-CF / ASA Filament
• TPU Filament

• Aluminium Tubing wall thickness of 1 mm

  -16mm x 190mm

  -20mm x 170mm

  -24mm x 190mm

• two clips 5/32"X2-15/16"
• 2 rivets with a size of 2 and 3 mm
• Velcro strap min 20cm long
• 5mm Drill Bit (A stand drill with a clamp would be useful)

This custom trail jack is **very easy to build**! 🛠️ You only need **three different sizes of aluminum tubing** (I used 16mm, 20mm, and 24mm with a wall thickness of 1 mm), which should fit smoothly inside each other.

After cutting the tubes to your desired length (I cut the tubs in 16mm x 190mm, 20mm x 170mm and 24mm x 190mm), just **drill the holes 5mm** as shown in the example photo. The exact placement doesn’t need to be super precise, but the holes should go **straight through both sides** of the tubing to ensure stability.

You will also need **two clips** to secure the tubes and a **Velcro strap** to keep everything together when storing it. 👌